Optional features

Introduction

Software licenses provide extra options for the Colorado M-series. Depending on the printer type, licenses are standard or optional.

Available options (licenses)

1. FLXfinish⁺

   With this license, the operator is allowed to use the matte print modes and the mixed matte/gloss print mode; otherwise only glossy print modes are available.

   This license is also required to print in Backlit mode.

2. Print inside and double sided

   The license allows:

   • printing on the inner side of the media

   • winding the media with the printed side to the inside

   This makes double sided prints possible.

   Double-sided printing is only guaranteed in Matte modes, otherwise the printed side will stick to the print surface. So for double-sided printing, it is also required to have a FLXfinish⁺ license.

3. Second roll in the drawer

   Without the license, media can only be loaded into position 1 in the drawer. For inside printing, the media is still allowed into position 2, since the media is still fed through the slot for position 1.

4. White ink

   With this license, the operator is allowed to use white ink print modes.

   For installed Colorado M-series configurations this upgrade requires:

   1. The license for white ink

   2. A printhead for white ink

   3. A service visit for installation and calibration of the printhead

   You can downgrade the license for white ink. This is non-reversible.

5. Temporary speed license M5

   You can temporarily upgrade a Colorado M-series M3/M3W configuration to M5/M5W. The temporary speed license is available per month and only allows use of 700 ml ink bottles.

6. Colorado M-series speed license M5

   You can upgrade a Colorado M-series M3/M3W configuration to M5/M5W. This gives you access to the M5/M5W print modes. An M5/M5W configuration can use both 700 ml and 1000 ml ink bottles.

Available hardware options

1. Jumbo roll interface

   Interface kit to enable jumbo roll feeding for an M5/M5W configuration.

2. Colorado M-series magnetic media kit

   Hardware kit to enable use of magnetic media.

Options per printer type

X: standard

O: optional

-: not applicable