Configure the media families

Go to the media families

1. Open the Settings Editor and go to: [Media]  → [Media families] .

   

Add a media family

1. Click [Add].

2. Use the table below for information on the options

3. Click [OK].

Copy a media family

1. Select the media family.

2. Click [Copy].

3. Click [OK].

Edit a media family

1. Select the media family.

2. Click [Edit].

3. Use the table below for information on the options

4. Click [OK].

Delete a media family

1. Select the media family.

2. Click [Delete].

Print a color reference chart

1. Select the media family.

2. Click [Print].

3. Select the media.

4. Click [OK].

Define the default media family

1. Open the Settings Editor and go to: [Color]  → [Color defaults] .

   

2. Go to [Default media family].

3. Select the default media family.

4. Click [OK].

Print a media family calibration report

1. Open the Settings Editor and go to: [Support]  → [Troubleshooting] .

2. Click [Print media family calibration report].

3. Click [OK].

Show a warning symbol when a media family needs calibration

1. Open the Settings Editor and go to: [Media]  → [Configuration] .

2. Enable the setting [Warnings when media family needs calibration].

3. Click [OK].

[Name]

Name according to naming conventions.

[Description of media print mode]

Indicates a description of the media family.

[Calibration timer (days)]

Indicates the media family calibration interval which can be set between 0 and 365 days, in steps of 1 day. Enter 0 to disable the media family calibration timer.

[G7®]

Indicates a media family used for G7 calibration.

[Default media for calibration]

Indicates the default media used for printing the calibration charts.

[Discard calibration data of the inline spectrophotometer]

Removes the calibration curves made with the internal sensor.

[Output profile]

Indicates the output profile of the media family.

[Last calibration date]

Indicates when the last calibration occurred.