TRM varioPRINT 6000 Series v8.5.2

The current PRISMAsync mark is 8.1.3.

In July 2022, the following chapters have been updated:

Chapter "Application notes":
- New procedure: Enfocus Switch app bundle for PRISMAsync mark 8.1 or higher
Chapter "JDF Ticket":
- New topic "Repeat Page Programming" under "Print settings"

In March 2022, the following chapters have been updated:

Chapter "PDF":
- Topic "PDF implementation" has been updated: PDF uses APPE version 5.7 (5.7.8000.0).
Chapter "PCL"
- Artifex GhostPDL PCL upgraded to version 9.54.0.
Chapter "JDF Ticket":
- One new supported JDF ticket attribute in the "Output / finishing" sub-chapter: oce:OemFinishingTemplate
Chapter "Document Finishing Device (DFD) interface":
- Minor corrections in the table describing the DFD interface signals
Chapter "SNMP"
- New SNMP field "tonerbottlesfedblack.0" in the "Canon billing counters" table

In September 2021, a new version of this document was released for the version of 8.1.2 PRISMAsync mark.

The following chapters have been updated:

Chapter "JMF Communication" - secure communication HTTPS is supported starting with mark 8.1 in following topics:
- JMF messages
- JMF HTTP port

Version of PRISMAsync increased to mark 8.1.1 with the following new features:

Chapter "JDF Ticket":
- New Topic "Print Order" under "Print settings"
Chapter "JMF Communication":
- 2 new supported "JMF messages" in "Assign Media" : oce:AssignMediaToTray and oce:UnassignMediaToTray
Chapter "PDF":
- Topic "PDF implementation" has been updated: PDF uses APPE version 5.6.
Chapter "Transaction Printing"
- Topic "SRA IPDS Introduction": the SRA supported version is now 19.2.
Chapter "Application notes":
- New procedure: Dataline MultiPress Integration for PRISMAsync Print Server mark 8.1.1 or higher

On 6 May 2021, the following chapters have been updated for PRISMAsync mark 8.1:

Chapter "Document Finishing Device (DFD) interface" - new.
Chapter "JDF":
- Topic "Advanced impositioning" with sub-topics: "Same-up Custom", "Cut & Stack," "Folding extension", "Spacing", "TrimShift/Align".
- Some topics changed order inside the chapter.
Chapter "JMF communication":
- Topic "JMF status details" has been added.
- Maximum size for a JMF message and JDF ticket
Chapter "PRISMAsync Print Server ", topic "Media selection" under "Job workflow management" - minor updates.
Chapter "PDF":
- Topic "PDF implementation" has been updated: PDF uses APPE version 5.5.

On 24 August 2020, this document has been updated for PRISMAsync mark 7.4.1:

On 16 June 2020, the following chapters have been updated for PRISMAsync mark 7.4:

Chapter "Application notes".
- New procedure "Handling media from Quadient Inspire to the PRISMAsync mark 7.1 or higher".
Chapter "JDF/JMF":
- Topic "JMF messages" has been updated.
- Topic "JMF subscriptions" has been added.
Chapter "Accounting":
- Topic "Accounted pages" has been updated.
- Topic "Media" has been updated.
- Topic "Supported Fields" has been updated.
Chapter "PDF"

The varioPRINT 6000 series uses Adobe PDF Print Engine (APPE) version 5.4 as the default interpreter to print PDF files.
Chapter "SRA IPDS": topic "Introduction" has been updated:
- SRA IPDS uses APPE version 5.2

On 17 December 2019, the following chapters have been updated:

Chapter "Application notes" - a new chapter.

This chapter contains the procedures "Heidelberg Prinect Integration for PRISMAsync mark 7.1 or higher", and "Kodak Prinergy Integration for PRISMAsync mark 7.2 or higher".
Chapter "JDF ticket"
Chapter "JMF communication"
Chapter "SRA PCL"

A new chapter has been added to the TRM:

Transaction printing

This new chapter bundles the following two existing chapters for transaction printing:
- SRA IPDS
- SRA PCL

On 14 June 2019, the following chapters have been updated:

Chapter "JDF ticket"
Chapter "JMF communication"
Chapter "PDF"
Chapter "Accounting"
Chapter "SRA IPDS": topic "Introduction" has been updated:
- SRA version 18
- SRA IPDS uses APPE version 4.9

On 28 March 2019, the following chapters have been updated:

Chapter "PRISMAsync Print Server": topics "Automated workflows" and "Hotfolder" have been updated.
Chapter "Hotfolder printing" has been removed.

On 20 March 2019, the following chapter has been updated:

Chapter "Copy Control Device": topic "CCI device" has been updated.

A large print is a sheet with a long edge >= 364 mm. This used to be >= 390 mm.

On 10 January 2019, the following chapters have been updated:

On 25 July 2018, the following chapters have been updated:

Chapter "Accounting": topic "Accounted pages" has been updated.
Chapter "JDF/JMF" has been renamed to "JMF communication". The chapter "JMF communication" has been restructured.
Chapter "JDF ticket" has been restructured.

On 29 June 2018, the following chapters have been updated:

Chapter "SRA IPDS": topic "Introduction" has been updated:
- SRA version B16P7 (07.14.10)
- SRA IPDS uses APPE version 4.6
Chapter "JDF/JMF": topic "SubmitQueueEntry" has been updated.
Chapter "JDF ticket": topics "Output destination", "Media type", "Pre-punched media", "Alignment" and "Subset stapling" have been updated.

On 4 May 2018, the readability of all chapters has been improved.

On 23 April 2018, the following chapters have been updated:

On 10 April 2018, the chapter "JDF/JMF" has been updated:

Topic "JMF logging" has been updated.
Topic "JDF ticket transformation using XSLT" has been added.
Paragraph "Examples of XSLT scripts" has been added. It contains the following examples of XSLT scripts:
1. Starting point for an XSLT script to transform JDF
2. Add staples based on the job name in the JDF ticket
3. Add staples based on the job name even though the JDF namespace does not contain the CustomerInfo

The chapter "JDF ticket" has been updated:

For edition 2018-03, the following chapters have been updated:

For edition 2017-08, the following chapters have been updated:

Topic "This Technical Reference Manual" now contains a printable version of the TRM.
Chapter "SRA PCL"

For edition 2017-07, the following chapters have been updated:

Change history