Loading

List of Colorado M-series maintenance materials

Items to order

The items listed below can be requested from your local representative:

Maintenance material

Used for

Prescribed Microflex gloves

Handling Colorado M-series UVgel ink.

Lint free cloth

Cleaning the printer when polluted with ink.

Prescribed Swabs

Cleaning pollution on surfaces such as the outer edge of the matrix plate.

Cleaning liquid (Cleaner MB - methyl benzoate)

Cleaning ink pollution on heated surfaces: the matrix plate only. Used only with swabs.

IMPORTANT

This cleaning liquid is not used for any other parts in the printer.

Maintenance tray

Replacing a full maintenance tray.

Tissue cassette

Replacing a tissue cassette.

UVgel ink (CMYK)

Refilling new ink.

Set of foams

Replacing polluted guide plate foams.

Roller assy

Replacing a polluted guide plate roller assy.

Filters

Replacing saturated filters.

Aerosol filters

Replacing aerosol filters.

Bracket with two lubricators and pins

Replacing the lubricators.

Xtran pinch rollers

Replacing the rollers of the Xtran pinch.

Knife

Replacing a blunt embedded knife.

Tension bar

Replacing a tension bar that has been damaged or lost.

Drive gear

Replacing a drive gear that has been damaged on a media shaft.

Items provided once

The items listed below are delivered only once, together with the machine at installation:

Maintenance material

Used for

Screwdriver (Torx-25)

Opening the chiller cover and the knife compartment cover.

Pouring can

Refilling demineralized water in the chiller.

Items to provide yourself

The items listed below you should provide yourself:

Maintenance material

Used for

Cleaning liquid (IPA)

Cleaning ink pollution on non-heated surfaces, such as the platen, maintenance tray, drawer, ink unit, MC scanner, non-heated parts of the maintenance station, etc.

IMPORTANT

This cleaning liquid is not used for the matrix plate and heated parts of the maintenance station.

Demineralized water

Refilling the chiller and cleaning the mirrors.

Screwdriver (Torx-6)

Replacing the knife.

Screwdriver (Torx-20)

Replacing a drive gear and a bracket with lubricators.

Knife, pair of scissors

Making a manual cut.

Vacuum cleaner

Vacuuming the chiller.

Compressed air duster

Cleaning the platen.

Wooden picks (2mm)

Cleaning the platen.

Rough lint free cloth

Cleaning the platen.

Scraper

Cleaning the platen.