The items listed below can be requested from your local representative:
Maintenance material |
Used for |
---|---|
Prescribed Microflex gloves
|
Handling Colorado M-series UVgel ink. |
Lint free cloth
|
Cleaning the printer when polluted with ink. |
Prescribed Swabs
|
Cleaning pollution on surfaces such as the outer edge of the matrix plate. |
Cleaning liquid (Cleaner MB - methyl benzoate)
|
Cleaning ink pollution on heated surfaces: the matrix plate only. Used only with swabs. IMPORTANT
This cleaning liquid is not used for any other parts in the printer. |
Maintenance tray
|
Replacing a full maintenance tray. |
Tissue cassette
|
Replacing a tissue cassette. |
UVgel ink (CMYKW)
|
Refilling new ink. |
Set of foams
|
Replacing polluted guide plate foams. |
Roller assy
|
Replacing a polluted guide plate roller assy. |
Filters
|
Replacing saturated filters. |
Aerosol filters
|
Replacing aerosol filters. |
Bracket with two lubricators and pins
|
Replacing the lubricators. |
Xtran pinch rollers
|
Replacing the rollers of the Xtran pinch. |
Knife
|
Replacing a blunt embedded knife. |
Tension bar
|
Replacing a tension bar that has been damaged or lost. |
Drive gear
|
Replacing a drive gear that has been damaged on a media shaft. |
The items listed below are delivered only once, together with the machine at installation:
Maintenance material |
Used for |
---|---|
Screwdriver (Torx-25)
|
Opening the chiller cover and the knife compartment cover. |
Pouring can
|
Refilling demineralized water in the chiller. |
The items listed below you should provide yourself:
Maintenance material |
Used for |
---|---|
Cleaning liquid (IPA)
|
Cleaning ink pollution on non-heated surfaces, such as the platen, maintenance station, maintenance tray, drawer, ink unit, MC scanner, ruler. IMPORTANT
This cleaning liquid is not used for the matrix plate and heated parts of the maintenance station. |
Demineralized water
|
Refilling the chiller and cleaning the mirrors. |
Screwdriver (Torx-6)
|
Replacing the knife. |
Screwdriver (Torx-20)
|
Replacing a drive gear and a bracket with lubricators. |
Knife, pair of scissors
|
Making a manual cut. |
Vacuum cleaner
|
Vacuuming the chiller. |
Compressed air duster
|
Cleaning the platen. |
Wooden picks (2mm)
|
Cleaning the platen. |
Rough lint free cloth |
Cleaning the platen. |
Scraper |
Cleaning the platen. |