The items listed below can be requested from your local representative:
|
Maintenance material |
Used for |
|---|---|
|
Prescribed Microflex gloves
|
Handling Océ Colorado 1650 UVgel ink. |
|
Lint free cloth
|
Cleaning the printer when polluted with ink. |
|
Swabs
|
Cleaning pollution on surfaces such as the maintenance station, wiper and clean wall, matrix plate etc. |
|
Matrix plate cleaning tool
|
Cleaning the matrix plate (holder). |
|
Matrix plate cleaning foam
|
Cleaning the matrix plate (foam to put in the holder). |
|
Cleaning liquid (Cleaner MB - methyl benzoate)
|
Cleaning ink pollution on heated surfaces: the matrix plate, wiper and clean wall only. Used only with swabs.  IMPORTANT
This cleaning liquid is not used for any other parts in the printer. |
|
Maintenance tray
|
Replacing a full maintenance tray. |
|
Wiper
|
Replacing the wiper. |
|
UVgel ink (CMYK)
|
Refilling new ink. |
|
Set of foams
|
Replacing polluted guide plate foams. |
|
Roller assy
|
Replacing a polluted guide plate roller assy. |
|
Filters
|
Replacing saturated filters. |
|
Bracket with two lubricators and pins
|
Replacing the lubricators. |
|
Knife
|
Replacing a blunt embedded knife. |
|
Tension bar
|
Replacing a tension bar that has been damaged or lost. |
|
Drive gear
|
Replacing a drive gear that has been damaged on a media shaft. |
The items listed below are delivered only once, together with the machine at installation:
|
Maintenance material |
Used for |
|---|---|
|
Screwdriver (Torx-25)
|
Opening the chiller cover and the knife compartment cover. |
|
Pouring can
|
Refilling demineralised water in the chiller. |
The items listed below you should provide yourself:
|
Maintenance material |
Used for |
|---|---|
|
Cleaning liquid (IPA)
|
Cleaning ink pollution on non-heated surfaces, such as the platen, maintenance tray, drawer, ink unit, M&C scanner, non-heated parts of the maintenance station, etc. IMPORTANT
This cleaning liquid is not used for the matrix plate, wiper and clean wall, heated parts of the maintenance station. |
|
Demineralised water
|
Refilling the chiller and cleaning the mirrors. |
|
Screwdriver (Torx-6)
|
Replacing the knife. |
|
Screwdriver (Torx-20)
|
Replacing a drive gear. |
|
Crosshead screwdriver
|
Replacing the lubricators. |
|
Knife, pair of scissors
|
Making a manual cut. |
|
Vacuum cleaner
|
Vacuuming the chiller. |
|
Compressed air duster
|
Cleaning the platen. |
|
Wooden picks (2mm)
|
Cleaning the platen. |
|
Rough lint free cloth |
Cleaning the platen. |
|
Scraper |
Cleaning the platen. |