Use the /OutputType pagedevice parameter to select the output device and output tray if several trays are available.
This section contains two tables that display the supported values for OutputType, but for different printers. Use:
The first table for printers of the imagePRESS family.
The second table for printers of the VarioPrint i-300 Series.
The same tray can be addressed in several ways:
The first line corresponds to the most explicit name.
Any remaining names are for compatibility with the PostScript OTS or backwards compatibility.
Selection of specific destinations is only possible when the corresponding finisher is installed. Value "Auto" lets the system choose the destination based on the selected finishing options.
The following values are supported for printers of the imagePRESS family:
|
Finishing device |
Tray |
/OutputType |
|---|---|---|
|
Automatic selection based on finishing |
Auto |
|
|
Finisher (AJ1; AM1; AN1; A1; T1; W1PRO) |
TopTray (T1 finisher only) |
StackerStapler_TopTray |
|
Upper tray |
StackerStapler_UpperTray StackerTray stackertray |
|
|
Lower tray |
StackerStapler_LowerTray Finisher StackerStapler stackerstapler |
|
|
Finisher A1 |
SampleTray |
StackerStapler_SampleTray |
|
Saddle Finisher (AJ2; AM2; AN2; T2; W2PRO) |
Saddle Tray |
StackerStapler_SaddleTray BookletMaker |
|
High Capacity Stacker C1 (first) |
TopTray |
Stacker_1_TopTray Printer Tray Tray Upper bin |
|
StackTray |
Stacker_1_StackTray HighCapacityStacker highcapacitystacker HighCapacityStacker 1 highcapacitystacker 1 |
|
|
Stacker HCS3 (first) (Canon High Capacity Stacker F1; G1; H1) |
TopTray |
StackerHCS_1_TopTray Printer Tray Tray Upper bin |
|
MainTray |
StackerHCS_1_MainTray Note: For backwards compatibility, the following output types are also supported: Stacker_1_StackTray Stacker_1_StackTray1 Stacker_1_StackTray2 HighCapacityStacker highcapacitystacker HighCapacityStacker 1 highcapacitystacker 1 |
|
|
High Capacity Stacker C1 (second) |
TopTray |
Stacker_2_TopTray |
|
StackTray |
Stacker_2_StackTray HighCapacityStacker 2 highcapacitystacker 2 |
|
|
Stacker HCS3 (second) (Canon High Capacity Stacker F1; G1; H1) |
TopTray |
StackerHCS_2_TopTray |
|
MainTray |
StackerHCS_2_MainTray Note: For backwards compatibility, the following output types are also supported: Stacker_2_StackTray Stacker_2_StackTray1 Stacker_2_StackTray2 HighCapacityStacker 2 highcapacitystacker 2 |
|
|
External Finisher |
Tray |
ExternalFinisher OEM Finisher OEM Finisher Face Up OEM Finisher Face Down  NOTE
Notice that white spaces are included in the name of the output type. |
|
Perfect Binder (B1; D1; E1) |
Tray |
PerfectBinder_Tray PerfectBinder |
|
Paper Folding Unit (F1; G1; J1) |
Tray |
Folder_Tray Folder |
|
CopyTray (main body) |
Tray |
CopyTray_Tray |
The following values are supported for the VarioPrint i-300 Series:
|
Finishing device |
Tray |
/OutputType |
|---|---|---|
|
Automatic selection based on finishing |
Auto |
|
|
Stacker HCS3 (first) |
TopTray |
StackerHCS_1_TopTray Printer Tray Tray Upper bin |
|
MainTray |
StackerHCS_1_MainTray Stacker_1_StackTray Stacker_1_StackTray1 Stacker_1_StackTray2 HighCapacityStacker highcapacitystacker HighCapacityStacker 1 highcapacitystacker 1 |
|
|
Stacker HCS3 (second) |
TopTray |
StackerHCS_2_TopTray Printer Tray Tray Upper bin |
|
MainTray |
StackerHCS_2_MainTray Stacker_2_StackTray Stacker_2_StackTray1 Stacker_2_StackTray2 HighCapacityStacker 2 highcapacitystacker 2 |
|
|
External Finisher |
Tray |
ExternalFinisher OEM Finisher OEM Finisher Face Up OEM Finisher Face Down NOTE
Notice that white spaces are included in the name of the output type. |
The following values are supported for OutputType. The same tray can be addressed in several ways:
The first line corresponds to the most explicit name.
Any remaining names are for compatibility with the PostScript OTS or backwards compatibility.
Selection of specific destinations is only possible when the corresponding finisher is installed. Value "Auto" lets the system choose the destination based on the selected finishing options.
|
Finishing device |
Tray |
/OutputType |
|---|---|---|
|
Automatic selection based on finishing |
Auto |
|
|
Finisher AK1, TAF, TW1 |
Upper tray |
StackerStapler_UpperTray StackerTray stackertray |
|
Lower tray |
StackerStapler_LowerTray Finisher StackerStapler stackerstapler |
|
|
Saddle Finisher AK2, AF2 |
Saddle Tray |
StackerStapler_SaddleTray BookletMaker |
|
Stacker E1 (first) |
TopTray |
Stacker_1_TopTray Printer Tray Tray Upper bin |
|
StackTray1 |
Stacker_1_StackTray1 Stacker_1_StackTray HighCapacityStacker highcapacitystacker HighCapacityStacker 1 highcapacitystacker 1 |
|
|
StackTray2 |
Stacker_1_StackTray2 |
|
|
Stacker HCS3 (first), F1, G1, H1 |
TopTray |
StackerHCS_1_TopTray Printer Tray Tray Upper bin |
|
MainTray |
StackerHCS_1_MainTray Note: For backwards compatibility, the following output types are also supported: Stacker_1_StackTray Stacker_1_StackTray1 HighCapacityStacker highcapacitystacker HighCapacityStacker 1 highcapacitystacker 1 |
|
|
Stacker E1 (second) |
TopTray |
Stacker_2_TopTray |
|
StackTray1 |
Stacker_2_StackTray Stacker_2_StackTray1 HighCapacityStacker 2 highcapacitystacker 2 |
|
|
StackTray2 |
Stacker_2_StackTray2 |
|
|
Stacker HCS3 (second), F1, G1, H1 |
TopTray |
StackerHCS_2_TopTray |
|
MainTray |
StackerHCS_2_MainTray Note: For backwards compatibility, the following output types are also supported: Stacker_2_StackTray Stacker_2_StackTray1 HighCapacityStacker 2 highcapacitystacker 2 |
|
|
External Finisher |
Tray |
ExternalFinisher OEM Finisher Face Up OEM Finisher Face Down NOTE
Notice that white spaces are included in the name of the output type. |
|
Perfect Binder C1 |
Tray |
PerfectBinder_Tray PerfectBinder |
|
Paper Folding Unit F1 |
Tray |
Folder_Tray Folder |