The dashboard of the control panel indicates if the punch waste tray is full.
You can check the current status of the punch waste tray at the control panel. Location: .
The print system cannot punch when the punch waste tray is full. This instruction only describes the removal of punch waste of the stacker / stapler. Refer to the user manual of the professional puncher how to remove punch waste from the professional puncher.
Location of the staple unit
IMPORTANT
Take care when you do maintenance tasks in options attached to the machine. When you do a maintenance task, such as replace a staple cartridge, remove waste, or solve jams, other machine parts can continue with job process activities.
|
Action |
||
|---|---|---|
|
1 |
Open the front cover of the stacker / stapler. |
|
|
2 |
Gently pull out the punch waste tray with two hands. |
|
|
3 |
Discard the punch waste. IMPORTANT
Make sure that the punch waste tray is completely emptied. |
|
|
4 |
Return the punch waste tray back to its original position. |
|
|
5 |
Close the front cover of the stacker / stapler.  CAUTION
When you close the front cover of the stacker / stapler, be careful not to get your fingers caught. This can cause personal injury. |