Misalignment between gloss and matte in FLXfinish⁺ mode

Introduction

The misalignment is visible as white lines between the gloss and matte parts of the print.

Problem description		Cause	Action
Misalignment between gloss and matte in FLXfinish⁺ mode	More likely to be visible in the 1^st meter of a print.	Media step not accurate	Perform a media calibration.

Perform a media calibration. Calibrate the media. A media calibration will minimize misalignment between matte and gloss in 1st meter (40") of the print, caused by the media step.
Make sure that the [Automatic advance correction] setting in the RIP is enabled. Use enhanced markers. Change the media settings.
After printing for about 0.5-0.7 m with [Automatic advance correction] enabled, the automatic advance correction will have optimized the media step. Any misalignment between matte and gloss in FLXfinish⁺ mode will then also disappear.

When the problem is not solved, contact your application specialist or local Service representative.