The items listed below can be requested from your local representative:
|
Maintenance material |
Used for |
|---|---|
|
Cooling liquid |
Refilling the chiller. |
|
Nitrile gloves |
Handling Océ Colorado 1640 UVgel ink. |
|
Lint free cloth |
Printhead maintenance: cleaning the matrix plate maintenance station, wiper and clean wall. |
|
Lint free swabs |
Printhead maintenance: cleaning the matrix plate maintenance station, wiper and clean wall. |
|
Matrix plate cleaning tool |
Cleaning the matrix plate (holder). |
|
Matrix plate cleaning foam |
Cleaning the matrix plate (foam to put in the holder). |
|
Cleaning liquid (IPA) |
Cleaning the printer when polluted with ink.  IMPORTANT
This cleaning liquid is not used for the matrix plate, maintenance station, wiper and clean wall, maintenance drawer. |
|
Cleaning liquid (methyl benzoate) |
Cleaning the matrix plate, maintenance station, wiper and clean wall, maintenance drawer. IMPORTANT
This cleaning liquid is not used for any other parts in the printer. |
|
Maintenance tray |
Replacing a full maintenance tray. |
|
UVgel ink (CMYK) |
Refilling new ink. |
|
Set of foams |
Replacing polluted guide plate foams. |
|
Roller assy |
Replacing a polluted guide plate assy. |
|
Filters |
Replacing saturated filters. |
|
Knife |
Replacing a blunt embedded knife. |
|
Tension bar |
Replacing a tension bar that has been damaged or lost. |
The items listed below are delivered only once, together with the machine at installation:
|
Maintenance material |
Used for |
|---|---|
|
Screwdriver (Torx-6) |
Replacing the knife. |
|
Pouring can |
Refilling cooling liquid in the chiller. |
The items listed below you should provide yourself:
|
Maintenance material |
Used for |
|---|---|
|
Screwdriver (Torx-20) |
Opening the chiller cover and the knife compartment cover. |
|
Knife, pair of scissors |
Making a manual cut. |
|
Nitrile gloves for handling chemical liquids |
Refilling the chiller. |
|
Vacuum cleaner |
Vacuuming the chiller. |