String search
Word search

Refill the chiller

Introduction

You can refill the chiller without service assistance.

About this task

  • The operator panel gives an orange warning when you can refill the chiller.

  • The operator panel gives a red warning when you must refill the chiller.

Before you begin

Use Océ Colorado 1650 prescribed:

  • Demineralised water

  • Pouring can

  • Screwdriver (Torx-25)

NOTE

For information on the prescribed maintenance materials, see List of Océ Colorado 1650 maintenance materials.

IMPORTANT

Only refill one litre of demineralised water when you get a warning, when you use more the liquid can spill and damage the machine.

Procedure

  1. On the operator panel, tap on the [System] icon on the right.
  2. Tap on [Power management] .
  3. Tap on [Power off].

    The system shuts down.

  4. When the system has shut down, pull to open the cover under the roll winder.
  5. Switch the power switch to the 'off' position.
  6. Pull out the two power supply plugs from the sockets.
  7. Go to the chiller side and locate the cover under the fan.
  8. Unscrew the left and right screws on top of the cover with the Torx-25.
  9. Lift the cover a little up and towards you (1), then lift it up fully and take it out (2)
  10. Locate the lid on top of the chiller.
  11. Pull to remove the lid.
  12. Pour one litre of demineralised water from the bottle in the pouring can.
    IMPORTANT

    Use demineralised water, do not use any other liquid.

  13. Place the pouring can on the chiller and fill the tank with the liquid.
  14. Close the lid, press it firmly.
  15. Place the cover back into position.
  16. Fasten the left and right screws on top of the cover.
  17. Plug the two power supply plugs back into the sockets.
  18. Switch the power switch back to the 'on' position, and close the cover.
Parent topic:
Maintain the printer
Privacy Terms of use Cookie information