Cleaning tasks and procedures

You are advised to clean the control panel weekly. (Clean the control panel)

To keep your print system in optimal condition and prevent poor image quality, clean the following system parts monthly:

Part	Task
Glass plate	Clean the glass plate area
Scanning area of the automatic document feeder	Clean the automatic document feeder scanning area
Scanning sensors	Clean the scanning sensors
Automatic document feeder rollers	Clean the rollers of the automatic document feeder
The inside of the print module	Clean the corona assembly wires
Corona assembly wires	Clean the corona assembly wires
Main unit roller	Clean the clean roller
Fixing roller	Refresh the fixing roller

WARNING

When you clean the machine, first turn OFF the main power switch, and disconnect the power cord. Failure to observe these steps can result in a fire or electrical shock.
Disconnect the power cord from the power outlet regularly, and clean the area around the base of the power plug's metal pins and the power outlet with a dry cloth to ensure that all dust and grime is removed. If the power cord is connected for a long period of time in a damp, dusty, or smoky location, dust can build up around the power plug and become damp. This can cause a short circuit and may result in a fire.

IMPORTANT

Do not dampen the cloth with too much water. This can damage prints or machine parts.
Do not use alcohol, benzene, paint thinner, or other solvents to clean machine parts. This can damage plastic machine parts.