String search
Word search

Adjust CMYK curves of a media family

PRISMAsync Print Server offers a CMYK editor with a pixel-precise preview to adjust the color density for specific media. You can emphasize colors or other elements for images printed on media that belong to a media family. The new CMYK curves are added to the media family calibration values.

There are two modes to edit the CMYK values of a media family:

  1. Basic mode, for simple CMYK editing with sliders for quick and easy color tweaking.

  2. Advanced mode, for precise CMYK editing.

IMPORTANT

Be aware that the CMYK adjustments affect all media of the media family.

Open the CMYK editor

  1. Calibrate the printer.

    IMPORTANT

    You must always perform a printer calibration before you continue with this procedure.

  2. Check the print quality to decide if you want to proceed.

  3. Touch [System]  → [Color adjustment]  → [Adjust color] .

  4. Touch [Edit CMYK curves].

  5. Select the media family.

  6. Select the halftone.

  7. Touch [Edit].

    The [Basic mode] window opens.

    CMYK editor in basic mode

Adjust the CMYK curves in basic mode

  1. Adjust the density values for the four colors.

  2. Use the zoom function to check the result of the adjustment in a specific area.

  3. Use your finger to pan the image.

  4. Touch [OK].

  5. Repeat this procedure for other halftones, if required.

Adjust the CMYK curves in advanced mode

Use the table below to adjust the CMYK curves in advanced mode.

CMYK editor in advanced mode

Task

Instruction

Go to the advanced mode

  1. Touch [Advanced mode].

Preserve colors

  1. Touch the dropper icon.

  2. Position the target icon with your finger on the color you want to preserve.

  3. Touch [Add points].

Apply a CMYK-curve preset

  1. Touch the load icon.

  2. Select a CMYK-curve preset.

  3. Touch [Done].

  4. Check the result in the preview.

Define the color clipping range

  1. Touch and drag the lower left-hand wedge .

  2. Touch and drag the upper right-hand wedge .

Adjust the curves manually

  1. Touch the raster icon.

  2. Touch the curve to add a control point .

    To delete a control point, first select a control point. Then, touch the trash icon.

  3. Touch the + and - signs to move the control point or drag the control point with your finger.

  4. Check the result in the preview.

  5. When ready, select a new color.

Adjust the contrast of all colors

  1. Touch the contrast icon.

  2. Use the slider to adjust the contrast.

  3. Check the result in the preview.

You can perform the above tasks also for other halftones.

More information

Parent topic:
Use CMYK curves
Privacy Terms of use Cookie information