Remove in the standard stacker / stapler the punch waste

The dashboard of the control panel indicates if the punch waste tray is full. (Learn about printer status)

You can check the current status of the punch waste tray at the control panel. Location: [System]  → [Printer]  → [Finishers] .

The print system cannot punch when the punch waste tray is full. This instruction only describes the removal of punch waste of the stacker / stapler. Refer to the user manual of the professional puncher how to remove punch waste from the professional puncher.

Location of the punch waste tray

IMPORTANT

Take care when you do maintenance tasks in optionals attached to the machine. When you do a maintenance task, such as replace a staple cartridge, remove waste, or solve jams, other machine parts can continue with job process activities.

Procedure

	Action
1	Open the front cover of the punch unit (1) and pull out the punch waste tray (2).
2	Discard the punch waste. IMPORTANT Make sure that the punch waste tray is completely emptied.
3	Return the punch waste tray back to its original position (1) and close the front cover of the punch unit (2). CAUTION When you close the front cover of the punch unit, be careful not to get your fingers caught. This can cause personal injury.