Normally you use the recommended media for the automatic gradation adjustment for an optimal print quality. (Learn about calibration)
When the recommended media is not sufficiently available, you can use custom media for automatic gradation adjustment. Automatic gradation adjustment uses an internal sensor to register the custom media.
IMPORTANT
For an optimal print quality on custom media, you are advised to register the custom media you use mostly.
For the registration of custom media you also need some sheets of the recommended calibration media. At the end of the registration procedure you can decide if you want to use the registered custom media for automatic gradation adjustment.
The storage place for custom media on the left-sidePrepare approximately 20 sheets of the recommended calibration media. These sheets are used as reference media during the procedure. (Learn about calibration)
Prepare approximately 20 sheets of the custom media. (Check and prepare media before loading)
IMPORTANT
You must always perform a printer calibration before you continue with this procedure.
IMPORTANT
Make sure the print system has no print quality artifacts when you execute this registration procedure.
You can find the media for standard automatic gradation adjustment in the Settings Editor. Location: .