The setting [Enable uniFLOW interface] is part of the procedure to set up the uniFLOW interface. For the complete procedure, see Setup the uniFLOW interface.
Click [System] - [Web submission] - <web server> - [General settings].
[Put the web site into maintenance mode]
Enable this option to put the web server into maintenance. Customers cannot access the web shop anymore.
Type the corresponding server name or IP address. When your server is part of a network, you have to use the UNC path to the server. For example: \\<servername.domain.topdomain>\.
[Allow the customer to print the order ticket and job ticket]
You can allow the customer to print the tickets of the job and order.
Type the address of the web server.
The fixed IP address
It is recommended to use the fixed IP address of the web server.
The Fully Qualified Domain Name (FQDN), for example, myserver.mydomain.net.
Use the FQDN if the web server does not have a fixed IP address. For example, the DHCP server assigns a dynamic IP address to the web server.
[Enable uniFLOW interface]
Enable the interface between the web server and the uniFLOW server. All web shops hosted by the web servers connected to the uniFLOW server will use the workflow as defined by uniFLOW. You can also disconnect a web server from the uniFLOW server. All web shops hosted by the disconnected web server will use the workflow as defined by PRISMAdirect.
Setting [Enable uniFLOW interface] becomes available when you have paired the PRISMAdirect server with the uniFLOW server.
Click [Save].