Before using your printing system, make sure that it is properly installed and that you have read and understand the User Documentation in order to operate the system safely and in accordance with its functional offerings. When using your machine make sure to always comply with the User Documentation.
In order to warn and make aware all persons operating the machine of possible risks, dangers and/or hazards, safety warning labels have been applied where required. For safe operation it is important to understand the meaning of every label. Make sure you read and understand all label descriptions before you start operating the machine.
In order to avoid potential hazards, make sure that preventive and remedial maintenance is executed by skilled persons and/or service technicians only.
Disclaimer:
CANON PRODUCTION PRINTING MAKES NO WARRANTY OF ANY KIND WITH REGARD TO THE CONTENTS OF THIS PUBLICATION, EITHER EXPRESS OR IMPLIED, EXCEPT AS PROVIDED HEREIN, INCLUDING WITHOUT LIMITATION, THEREOF, WARRANTIES AS TO MARKETABILITY, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE OF USE OR NON-INFRINGEMENT. CANON PRODUCTION PRINTING SHALL NOT BE LIABLE FOR ANY DIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES OF ANY NATURE, OR LOSSES OR EXPENSES RESULTING FROM THE USE OF THE CONTENTS OF THIS PUBLICATION.
Canon Production Printing reserves the right to revise this publication and to make changes from time to time in the content hereof without obligation to notify any person of such revision or changes.
The websites of the regional Canon sales offices are listed on the cover of the User Documentation. There you can find the addresses of the local Canon sales offices.
Canon Production Printing and its suppliers may collect, combine and use non-personal machine and (individual) user information and data you provide using the machine. Information on what type of information and data is retrieved or received and how access or entry to such information and data by Canon Production Printing and its suppliers is secured please visit Canon Production Printing Terms of Use and Privacy Statement at https://cpp.canon.
In some regions where this product is sold the following product name(s) may be registered as model number(s).
|
Product name |
Model number |
|---|---|
|
Colorado M-series
|
Océ 01079 |
|
RFID Reader |
Océ 01087 |
Depending on the context, the terms “printer”, “system”, “machine”, and “equipment” used in the User Documentation mean the printing system for which this User Documentation shall apply.
Some consumables and materials designated to be used by this machine are accompanied with Safety Data Sheets. Please refer to the corresponding Safety Data Sheets for specific Safety and Environment information and operating instructions. You may download the actual Safety Data Sheets and Product Safety Data Sheets from the support site of your product at https://downloads.cpp.canon/.
The machine bears the CE-mark to show conformance with applicable legal EEA-requirements. If applicable, the relevant CE Declaration of Conformity is part of the User Documentation. You may also download it from the support site of your product at https://downloads.cpp.canon/.
Canon Production Printing shall not be liable for damages from:
Failure to comply with the User Documentation;
Work performed incorrectly on the machine;
Unauthorized modifications.
|
Symbol |
Type |
Description |
|---|---|---|
|
WARNING |
Indicates a warning concerning operations that may lead to injury or even death to persons if not performed correctly. To use the machine safely, always pay attention to these warnings. |
|
|
CAUTION |
Indicates a caution concerning operations that may lead to injury to persons if not performed correctly. To use the machine safely, always pay attention to these cautions. |
|
IMPORTANT |
Indicates operational requirements and restrictions. Be sure to read these items carefully to operate the machine correctly, and avoid damage to the machine or property. |
|
PROHIBITED |
Indicates an operation that must not be performed. Read these items carefully, and make sure not to perform the described operations. |
|
NOTE |
Indicates a clarification of an operation, or contains additional explanations for a procedure. Reading these notes is highly recommended. |
|
Symbol |
Type |
Description |
|---|---|---|
|
Mandatory action |
Wear protecting gloves as prescribed in this document when performing a task or action in this area. |
|
Mandatory action |
Read the user instruction manual/user documentation before starting work or before operating equipment or machinery. |
|
Label |
Type |
Description |
|---|---|---|
|
|
Warning |
General warning sign. |
|
Warning |
Electricity: Hazardous electrical voltage inside. Do not remove cover. |
|
Caution |
Hot surface: Take care to avoid direct contact with hot surfaces. |
|
Caution |
Optical radiation: Take care to avoid injury to eyes and skin when in the vicinity of optical radiation. |
|
Caution |
Sharp element: Take care to avoid injury from sharp elements. |
|
Caution |
Crushing of hands: Take care to avoid injury to hands when in the vicinity of equipment with moving mechanical parts. |
|
Label |
Type |
Description |
|---|---|---|
|
Warning |
Electricity: Warning, shock hazard. Disconnect all power plugs from their electrical outlet before you start a maintenance or repair action. |
|
Warning |
Electricity: Double-pole neutral fusing. Risk of electric shock. Disconnect mains before servicing. |
|
Warning |
Electricity: The machine must be connected to a grounded power outlet. |
|
Caution |
Electricity: High leakage current. The machine must always be connected to a grounded power outlet. |
Instructed person
This User Documentation describes safeguards for the protection of an instructed person. Instructed person is a term applied to persons who have been instructed and trained by a skilled person, or who are supervised by a skilled person, to identify energy sources that may cause pain and to take precautions to avoid unintentional contact with or exposure to those energy sources.
WARNING
Put the power plug directly into a power outlet that has the same configuration as the plug. The use of an adapter can result in an inadequate power supply. If a proper power outlet is not available, ask a qualified electrician to perform the installation.
This machine has two power connections. Do not connect both mains power cables to same building branch circuit.
IMPORTANT
Do not connect the machine to a mains voltage or frequency which differs from the value stated on the power marking label. When a connection to a different mains voltage or frequency is required, contact your authorized service representative.
WARNING
Do not scratch, abrade, heat, twist, bend, or place a heavy object on the power cord or cause any other damage to it. The use of a damaged power cord (e.g. exposed core wire or broken wire) could result in an electrical shock, fire or malfunction of the machine. If the power cord is damaged, immediately switch off the power switch and unplug the power cord from the power outlet. Contact your authorized service representative.
Do not use a multiple outlet adapter or an extension lead. Contact your authorized service representative if an extension lead is required. The use of an extension cord may result in fire or electrical shock.
Do not use any power cord other than the one provided. Never use the power cord with any other electrical device.
Only use a power cord that is fitted with a protective earth conductor.
When the machine has to be connected via a wall socket, place the machine close to a wall socket that is easily accessible. The power plug serves as a disconnecting device.
Do not route the power cords in such a way that they can be stepped on or tripped over.
Connect the power cord to a power outlet that is equipped with a protective earthing (PE) terminal.
This equipment is not designed for connection to an IT power system. An IT power system is a voltage network in which the neutral wire is not connected to earth.
WARNING
The machine may be transported, assembled, installed, moved and repaired only by an authorized service representative.
The installation of accessories and options not permitted for the machines may constitute a violation of the Safety Regulations and Directives, and can also damage the machine.
Consult your authorized service representative for details on which accessories and options are permitted for the machine.
Only use cables specified by the manufacturer.
Place the machine on a horizontally level surface of sufficient support.
Do not place the machine in a location that is subject to vibrations and shocks.
Do not use flammable sprays, liquids or gases near the product as this can cause fire.
WARNING
The machine must be connected to an air exhaust (to the outside atmosphere) or must contain the filters and proper room ventilation for keeping the chemical emission below the limits. See the Product Safety Data Sheet (PSDS) for the ventilation recommendations.
For keeping the chemical emission below the limits do not place the machine in a room which is too small or insufficiently ventilated. See the Product Safety Data Sheet of the machine for the ventilation recommendations.
WARNING
Do not lean, lie or stand on any part of the machine, including parts that can be pulled outwards (e.g. media drawers).
Read the User Documentation carefully before operating the machine. In case of any questions or uncertainties regarding the content of this document, contact your authorized sales or service representative.
Make sure that no objects (e.g. jewelry chains, paper clips, coins) or liquids can get into the interior of the machine. Do not place containers with fluid on top of or near the machine.
Disconnecting the product from the mains-supply network (unplug, power-switch) might result in damage to the system.
Do not open any door when the machine is starting up or running, unless the control panel displays a message that asks you to open one or more doors.
If you operate the machine remotely, make sure that nobody is working on the machine.
CAUTION
This equipment is not suitable for use in locations where children are likely to be present.
WARNING
Do not modify the machine. Modifying the machine can cause a hazard like fire, electrical shock or other injuries or jeopardize given warranties.
Only perform maintenance activities as described in the User Documentation.
Only instructed or skilled persons are allowed to maintain the machine, to avoid any risk and not to jeopardize given warranties.
Do not bridge or disable any safety interlock devices. Disabling or otherwise defeating safety interlock devices will cease their function as safety guard and may create hazardous conditions for all people operating the machine.
Use compressed air only to clean the platen.
CAUTION
Repairs to the machine may only be performed by authorized service representatives.
Service areas may only be opened by authorized service representatives. Do not remove covers and panels that are fixed to the machine. Some parts of the machine may have a hazardous electrical component, hazardous heat source or a laser beam source inside that could cause an electrical shock or other injuries.
CAUTION
Disconnect the power cord and other cables before you move the machine.
Only skilled person(s) are allowed to move the machine.
WARNING
In case smoke and/or fire is noticed:
Immediately try to close in a safe way all machine covers and doors so that the smoke or fire stays within the enclosure of the machine. Prevent personal injury during closing of these doors and covers.
Immediately cut of the electrical power to the machine by disconnecting the mains plug or proper disconnecting device. Make sure that the machine cannot be switched on any more.
Immediately inform the emergency response services.
Poisonous gases can be produced in any fire. They can also result from a fire in this machine.
Keep into account: Canon Production Printing systems are designed in such a way that fire is encapsulated within the enclosure, thus preventing the further spread of fire to the customer’s premises.
In case of damage to the covers, power cable, operating elements, or in case of penetration of fluids or foreign bodies, disconnect the machine from the power supply and contact your authorized service representative.
WARNING
Do not throw ink or ink containing parts or contaminated parts into an open flame.
Do not leave ink or ink containing parts or contaminated parts within reach of children.
Store consumables, supplies and maintenance materials away from any food and drinks.
Be careful when handling fluids. Clean up spilled fluids immediately.
CAUTION
Only use the materials the manufacturer recommends and that are developed for the machine.
Use maintenance materials and other materials for their intended purpose only.
Ink polluted gloves are considered chemical waste and must be disposed according to local regulations.
Dispose of waste of consumables, supplies and maintenance materials and its packaging containing residues according to federal, state and local regulations.
From the point of view of occupational health and safety it is not recommended that people who are sensitive to chemicals (e.g. people with asthma) work with ink or chemicals.
CAUTION
UV inks can be harmful if not properly handled. Cumulative exposure can lead to sensitization. Follow always the ink related Safety Data Sheets (SDS) guidelines carefully in order to ensure maximum safety.
Avoid skin contact with ink and uncured printed media.
Curing of media of the Canon Production Printing supported media-list is tested and considered sufficient under standard conditions.
After a printer error, wear gloves to handle the unfinished print.
Wear safety glasses with side shields when handling ink or maintenance materials. Follow always the ink related Safety Data Sheets (SDS) guidelines carefully in order to ensure maximum safety.
Wear gloves when contact with ink or maintenance materials is possible. Gloves should always overlap sleeves. Follow the ink related Safety Data Sheets (SDS) guidelines carefully in order to ensure maximum safety.
If a glove, sleeve or apron is contaminated with ink follow the ink related Safety Data Sheets (SDS) guidelines carefully in order to ensure maximum safety.
Do not reuse single-use gloves.
Do not handle prints without gloves if the ink is not properly cured.
Ink polluted gloves and uncured media are considered chemical waste and must be disposed according to local regulations.
If ink contacts your skin: clean immediately with soap and water. Do not use alcohol or other solvents.
If ink contacts your eye(s) flush with water, consult the ink related Safety Data Sheet (SDS) and contact a doctor.
Inks are not suitable for food-related or children-related applications.
Always measure the media thickness and set the print carriage height correctly for that media. Printing at an incorrect height causes excessive emissions of UV light and UV ink (mist).
All waste containing uncured UV ink is hazardous and must be disposed of separately according to local regulations. Do not mix ink waste with non-hazardous waste (household, office, etc.). Do not allow ink waste to reach sewage systems or drinking water supplies. Ink waste includes maintenance pads, cloths, gloves and any other material containing uncured or partly cured UV ink. Dispose Ink waste according to federal, state and local regulations.
Discard the ink bottle or maintenance material bottle if it shows any sign of wear, physical damage (cracking or leaking) or at expiry (date), according to federal, state and local regulations.
CAUTION
Avoid looking directly at the UV light.
CAUTION
Do not touch or ingest fluids from a broken Liquid Crystal Display (LCD). When clothes or skin come into contact with the fluid, immediately clean the clothes and skin with soap and water. After eye contact, immediately rinse the eyes with a washing lotion for at least 15 minutes and consult a physician.
Do not rub, press or touch the (LCD) display surface with a hard material, because the polarizer at the surface can be easily scratched. The LCD module can get damaged when you drop, pinch too hard or punch the module, as it is made of glass. When glass breaks, be careful you do not get injured by pieces of glass.
IMPORTANT
Keep your printing room environments clean. This prevents dust buildup inside the printer and avoids damage to the machine.
WARNING
All parts are produced according to the sustainability policy of Canon Production Printing. You can discard all used parts into a common dustbin, or follow your local or national sustainability and waste disposal procedures.
WARNING
This machine contains static magnetic part(s) where there may be a risk of interference with Active Implanted Medical Devices (AIMD) e.g. cardiac pacemakers. Persons with an AIMD please keep at a safe distance. For more information please contact: Canon Production Printing.
CAUTION
For any information (e.g. requirements) about commissioning, disassembly, recycling, and disposal of CPP machines and/or materials (e.g. packaging waste, supplies, consumables) in your country or state please consult your local Canon NSO, Canon RSHQ and/or dealer.