[Advanced settings] 

[Print HP-GL/2 data even if out of the area defined by the PS command]

Check the option to print HP-GL/2 files even if these files contain data out of the area that is defined by the PS (Plot Size) command.

[Automatic detection of the printers]

Check the option to automatically detect the supported printers that are connected to the used subnet.

[The check frequency of the Hot Folders]

The application checks whether there are new files in the Hot Folders.

Select the time interval between the checks.

[Display domain name in user name]

Check the option to display also the domain name of the user

[Enable demo mode]

Check the option to show PRISMAproduce Tech in demo mode. Only available when no printers are connected. The top menu bar will display 'Demo mode' behind PRISMAproduce Tech.

In demo mode you can connect to four virtual printers. Jobs sent to a printer appear in the submitted jobs list, but are not actually printed.

A template created for a real printer cannot be imported into demo mode.

To exit the demo mode, disconnect all the printers and uncheck the option.

[Tolerance margin for media selection]

Select the tolerance margin that is used for the selection of the media.

[Retrieval frequency for printer information]

The application checks regularly if the printer status and the submitted jobs status are updated by the printer controller software.

Select the time interval between the checks.

[Time-out for automatic detection of the legend]

Select the time the application can use to detect the legend.

[Log level]

Select the level of logging required.

[LPR traces]

Select which details will be stored in the trace file.

• [None]

• [Data only]

• [Ticket only]

• [Ticket and data]